Detailed Product Description

Use Sweden original cellular silica gel desiccant wheel, cylinder-shaped dial formed by the cellular structure, and then from burning ceramic silica crystalline gel to the desiccant zones and recycle in the area of renewable box, dehumidified air through desiccant district, the wheel absorbed by the moisture in the air to get the dry air.
After absorbing water district according to the dehumidification cycle transferred to the regeneration zone from renewable heating air with a runner in the water from outdoor runner in the area of renewable water and then released back to the area to dehumidifiers, dehumidifiers and so At the same time continuous regeneration, will be stable dry air.

It performs exceptionally well when use in cooler climates,or when a low dewponit is required,as there is no actual water produced in the process, these units can work effectively at sub-zero tempetature.

Selection method:

1.Temperature and humidity requirements
2.Length, width and height.
3.Air flow, ventilation rate, supply air temperature.
4.Purification level.
5.The number of staff.
6.Whether cold water and steam available.
7.Which products (Capsule, batteries, glass, etc)

 

SPECIFICATION
Model	Function	Dehumidifying capacitykg/h Air circulationm3/h power(kw) CubageW×D×H)   G.Wkg	Dehumidifying Area (m2)
WK-250P	Constant humidity set computer dispaly	3.5                     500        9 650x1200x780                       80	40
WK-350P	Above	7                       1000     12-18 700x1200x800                      120	80
WK-450P	Above	12                     2000      15-27 750x1300x850                      180	150